Chibery 170° Soft Close Frameless Corner Hinges for Lazy Susan

Product Specifications

Upgrade your cabinets with Chibery adjustable soft close cabinet hinges, designed for flexible door movement, smoother closing, and practical surface-mount installation.

These cabinet hinges feature an adjustable opening angle from 130° to 170°, allowing you to fine-tune the door movement to suit your cabinet layout. The integrated hydraulic damping mechanism helps slow the door during closing, reducing slamming and everyday operating noise.

Made from durable cold-rolled steel, these hinges are designed for compatible cabinet doors measuring 5/8"–1-1/4" (16–30 mm) thick. Their offset opening action moves the door outward by approximately 1/2" to help it clear the cabinet side panel.

Suitable for compatible corner cabinets, Lazy Susan cabinets, cupboards, and upward-opening flaps, these adjustable hinges offer a versatile option for cabinet installation and replacement projects.

Key Features

Adjustable Opening Angle: 130°–170°

These adjustable cabinet hinges allow the opening angle to be set between approximately 130° and 170° using a screwdriver.

• 130° setting: Fully tighten the adjustment screw according to the product instructions.

• 170° setting: Fully loosen the adjustment screw according to the product instructions.

Adjust the setting to suit the cabinet layout and available clearance. Follow the supplied instructions and avoid forcing the adjustment screw beyond its intended range.

Hydraulic Soft Close for Smooth, Quiet Operation

The built-in hydraulic damping mechanism helps control the door during the final stage of closing.

By slowing the closing motion, the damper helps reduce slamming and operating noise while providing smoother everyday cabinet use.

Outward Door Movement for Better Side-Panel Clearance

During opening, the hinge moves the door outward by approximately 1/2 inch. This offset movement is designed to help the door clear the cabinet side panel and reduce interference in compatible cabinet configurations.

This feature can be useful for corner cabinets and other layouts where the door needs additional clearance to open properly.

Surface-Mount Installation

These hinges are designed for compatible surface-mount applications and do not require a traditional 35 mm recessed hinge cup hole.

They can be used for compatible cabinet configurations where surface installation is preferred. Depending on the cabinet material and screw type, pilot holes may still be appropriate for secure installation.

Compatible Door Thickness: 16–30 mm

These hinges are designed for compatible doors measuring:

5/8"–1-1/4" (16–30 mm)

Before ordering, verify your door thickness, mounting configuration, cabinet construction, and available clearance.

Multiple Cabinet and Furniture Applications

These adjustable soft close hinges are suitable for compatible applications such as:

• Kitchen corner cabinets

• Lazy Susan cabinets

• Cupboards

• Cabinet doors near adjacent side panels

• Upward-opening flaps

• Trap doors and access panels, where the hinge configuration is suitable

• Cabinet replacement and renovation projects

Check the intended door orientation and load requirements before using the hinge on upward-opening flaps or trap doors.

How to Adjust the Opening Angle

The hinge opening angle can be adjusted between approximately 130° and 170°.

To set approximately 130°: Fully tighten the adjustment screw as directed in the product instructions.

To set approximately 170°: Fully loosen the adjustment screw as directed in the product instructions.

After adjustment, open and close the door carefully to confirm that it moves freely and does not contact adjacent cabinets, walls, or hardware.

Before You Order

Please verify the following:

1. Door thickness: 16–30 mm (5/8"–1-1/4").

2. Mounting style: This is a surface-mount hinge, not a conventional concealed European hinge requiring a 35 mm cup hole.

3. Opening angle: Adjustable from approximately 130° to 170°.

4. Side-panel clearance: The hinge moves the door outward by approximately 1/2" during opening.

5. Cabinet application: Confirm that your cabinet, door orientation, and mounting surfaces are suitable for this hinge.

6. Door support: For upward-opening flaps or trap doors, verify the door weight and required support. Do not assume the hinge replaces a dedicated lid stay or safety support unless the product specifications confirm this.

Frequently Asked Questions

What is the opening angle of these cabinet hinges?

The opening angle is adjustable from approximately 130° to 170°.

Are these 170° cabinet hinges?

They can be adjusted to an opening angle of approximately 170°. The angle can also be reduced to approximately 130° using the adjustment screw.

How do I adjust the opening angle?

Use a screwdriver and follow the supplied instructions. Fully tightening the adjustment screw sets the angle to approximately 130°, while fully loosening it sets the angle to approximately 170°.

Do these hinges have soft close?

Yes. The built-in hydraulic damping mechanism helps slow the door during closing to reduce slamming and noise.

Do these hinges require a 35 mm cup hole?

No. These are designed for surface-mount installation and do not require a traditional 35 mm recessed hinge cup hole.

What door thickness is compatible?

The specified door thickness range is 16–30 mm (5/8"–1-1/4").

How does the outward door movement work?

During opening, the hinge moves the door outward by approximately 1/2" to help it clear the cabinet side panel.

Can these hinges be used on Lazy Susan cabinets?

They can be used for compatible Lazy Susan and corner cabinet configurations. Cabinet layouts differ, so verify door thickness, hinge placement, and available clearance before ordering.

Can these hinges be used for corner cabinets?

Yes, they are designed for compatible corner cabinet applications where adjustable opening angles and additional side-panel clearance are useful.

Can these hinges be used on upward-opening flaps or trap doors?

The product description lists these applications, but compatibility depends on the door orientation, weight, mounting surface, and support requirements. A dedicated lid stay or safety support may be needed.

Are these concealed hinges?

The hydraulic mechanism is concealed within the hinge design, but the hinge itself is described as surface mount. It should not be confused with a conventional European concealed hinge that requires a recessed cup hole.

What material are these hinges made from?

The supplied product description identifies cold-rolled steel as the construction material.

Need Help Confirming Compatibility?

Before ordering, check your door thickness, cabinet construction, available side clearance, mounting surfaces, and required opening angle. For replacement projects, compare the existing hinge configuration with the specifications above.