3D Adjustment Slow Self Closing 105° Stainless Concealed Clip-on Plate Hinge for Face Frame ＆ Frameless Door

Upgrade your cabinets with Chibery soft close concealed cabinet hinges, designed for precise cabinet-door alignment, smooth movement, and quiet closing.

These concealed hinges feature a built-in POM damper that helps slow the door during closing, reducing slamming and everyday operating noise. The 3D adjustment system allows you to fine-tune the cabinet door vertically, horizontally, and in depth using a standard screwdriver.

With a 105° opening angle, the hinge provides flexible cabinet-door movement and can remain open at angles between approximately 45° and 105°. When the opening angle is below approximately 45°, the door is designed to move toward the closed position.

The hinges are designed for compatible face frame and frameless cabinets and support cabinet doors from 14 mm to 22 mm thick. Depending on the selected configuration, they can be used for common half-overlay and full-overlay cabinet applications.

Key Features

Concealed Cabinet Hinge Design

These concealed cabinet hinges are installed inside the cabinet door and cabinet structure so that the hinge is largely hidden when the cabinet door is closed.

The concealed design provides a clean appearance that works well with kitchens, wardrobes, storage cabinets, and other furniture applications.

Soft Close with POM Damper

The integrated POM damping system helps control the final stage of door closing.

Instead of allowing the cabinet door to slam shut, the damper slows the movement for a smoother and quieter closing experience.

This makes the hinge suitable for frequently used kitchen cabinets, wardrobes, bathroom storage, and other household furniture.

3D Adjustment for Precise Door Alignment

The hinge provides three-dimensional adjustment to help achieve accurate cabinet-door positioning.

You can adjust:

• Vertical position – move the door up or down
• Horizontal position – adjust the door left or right
• Depth position – move the door inward or outward

These adjustments help correct minor alignment differences and improve the appearance of the cabinet-door gaps.

A standard screwdriver can be used for adjustment.

105° Opening Angle

The hinge opens to approximately 105°, providing convenient access to cabinet interiors.

The door can remain positioned at angles between approximately 45° and 105°. When the door is opened less than approximately 45°, the hinge is designed to guide the door toward the closed position.

Slim 1 mm Door Gap

The hinge is designed to help achieve a minimum door gap of approximately 1 mm when correctly installed and adjusted.

Actual door gaps may vary depending on cabinet construction, door dimensions, installation accuracy, hinge placement, and adjustment.

Face Frame and Frameless Cabinet Compatibility

These concealed hinges are designed for compatible face frame and frameless cabinets.

Different mounting configurations can be used according to the required cabinet-door overlay.

Half Overlay and Full Overlay Applications

The available configurations support different overlay requirements.

Half / Partial Overlay

Designed for approximately 6–10 mm overlay, including commonly used:

• 1/4" overlay
• 3/8" overlay

Full Overlay

Designed for approximately 17–21 mm overlay, including commonly used:

• 5/8" overlay
• 3/4" overlay

Please confirm the required overlay measurement before selecting the appropriate hinge configuration.

Compatible Applications

These soft close concealed cabinet hinges are suitable for compatible:

• Kitchen cabinets
• Bathroom cabinets
• Wardrobes
• Storage cabinets
• Cupboards
• Bedroom furniture
• Custom cabinetry
• Cabinet renovation projects
• Cabinet hinge replacement projects

How to Choose the Correct Hinge Configuration

Before ordering, identify your cabinet construction and door overlay.

For Face Frame Cabinets

Check the relationship between the cabinet door and face frame to determine the appropriate hinge configuration.

For Frameless Cabinets

Check the cabinet opening, door thickness, and required overlay to select the correct mounting configuration.

Measure the Overlay

Measure how far the cabinet door overlaps the cabinet opening or cabinet side.

Common configurations include:

Partial / Half Overlay: approximately 6–10 mm

Full Overlay: approximately 17–21 mm

Always compare your measurements with the product specifications before ordering.

Before You Order

Please verify the following:

1. Door Thickness
Suitable for cabinet doors measuring 14–22 mm thick.

2. Cup Depth
Specified cup depth: 11.5 mm.

3. Screw-Hole Distance
Specified screw-hole spacing: 45 mm.

4. Overlay Configuration
Confirm whether your application requires partial/half overlay or full overlay.

5. Cabinet Construction
Confirm that the hinge configuration is compatible with your face frame or frameless cabinet.

6. Opening Angle
The hinge opens to approximately 105°.

Frequently Asked Questions

A concealed cabinet hinge is installed inside the cabinet door and mounting area so that the hinge is largely hidden when the cabinet door is closed.

Yes. The integrated POM damper helps slow the cabinet door during closing for smoother and quieter operation.

What does 3D adjustment mean?

3D adjustment allows the cabinet door to be adjusted in three directions: vertical, horizontal, and depth.

What is the opening angle?

The hinge has an opening angle of approximately 105°.

Can the door stay open at different angles?

Yes. The hinge is designed to stay at angles between approximately 45° and 105°. Below approximately 45°, the door is guided toward the closed position.

What cabinet door thickness does this hinge fit?

The hinge is designed for compatible cabinet doors measuring 14–22 mm thick.

Can these hinges be used on face frame cabinets?

Yes. They are designed for compatible face frame cabinet applications.

Can these hinges be used on frameless cabinets?

Yes. They are also designed for compatible frameless cabinet applications.

What overlay sizes are supported?

The hinge configurations support approximately 6–10 mm partial/half overlay and 17–21 mm full overlay, including common 1/4", 3/8", 5/8", and 3/4" configurations.

What is the hinge cup depth?

The specified cup depth is 11.5 mm.

What is the screw-hole distance?

The specified screw-hole distance is 45 mm.

What is the minimum door gap?

The hinge is designed to help achieve a minimum door gap of approximately 1 mm when correctly installed and adjusted.

What hardware is included?

The package includes 2 easy-on dowels and 4 self-tapping wood screws per hinge configuration as specified by the product package.

Are these hinges suitable for kitchen cabinets?

Yes. They are suitable for compatible kitchen cabinets, wardrobes, storage cabinets, bathroom cabinets, and other furniture applications.

Need Help Choosing the Right Cabinet Hinge?

Before ordering, check your door thickness, cabinet construction, overlay measurement, cup depth, and mounting-hole spacing.

If you need help confirming the correct configuration, contact the Chibery customer service team before purchasing.